常州附近想过夜电话联系

One stop service provider for production, installation and commissioning of shot blasting machine

Shot blasting machine | shot blasting cleaning machine | through shot blasting machine source strength manufacturers

National Service Hotline

fifteen billion two hundred and sixty-nine million two hundred and four thousand seven hundred and seventy-seven

Hook type shot blasting machine, price, parameters

Author: admin Source: This station Time: 18:45, January 12, 2020
Product price:
Price ? 38000.00 ~ 220000.00 yuan
Starting batch ≥1 ? platform

Product specification:

model

Q376

Q378

Q3710

Q3720

Q3730

Q3750

Q37100

Cleaning size (mm)

φ600×1000

φ800×1500

Φ1000×1600

φ1400×2300

φ1600×2200

φ1800×2500

Φ3000×3000

Single hook lifting weight (kg)

six hundred

one thousand

one thousand

two thousand

three thousand

five thousand

eight thousand

Shot blasting amount (kg / min)

2×120

2×200

2×250

3×250

3×250

4×250

4×250

Lifting capacity of hoist (T / h)

fifteen

twenty-two

thirty

forty-five

forty-five

sixty

seventy-five

Separation capacity of separator (T / h)

fifteen

twenty-two

thirty

forty-five

forty-five

sixty

seventy-five

Ventilation rate (m3 / h)

five thousand

eight thousand

nine thousand

fifteen thousand

fifteen thousand

eighteen thousand

twenty thousand

Power (excluding dust removal kW)

nineteen

thirty-two point five

thirty-six point five five

sixty-one point two seven

sixty-four point four

seventy-eight point four

eighty-one point five

Overall dimension (mm)

4429×2850×3443

4325×2660×5009

5047×3850×5156

6110×3599×7842

7085×4650×8652

7062×5460×8652

8085×6400×8526

Hook type Shot blasting machine It is a series of standard products of Qingdao Dingzhu. The machine has no pit, so it can save construction cost, and is conducive to environmental protection and does not damage health. The work piece can get uniform and good Shot blasting cleaning With the introduction of foreign advanced technology, the shot blasting amount is large and the wear resistance of wearing parts is high.
 Hook type shot blasting machine, price, parameters
Product classification:
?
   Hook type shot blasting machine It is divided into single hook and double hook. The hook type shot blasting machine is loaded by two hooks and enters into shot blasting cleaning room alternately. The shot blaster is used to throw 0.2 ~ 0.8 projectiles to the surface of the workpiece, which makes the surface of the workpiece reach a certain roughness, makes the workpiece beautiful, or changes the compressive stress of the workpiece, and improves the service life. This machine is widely used in surface cleaning or strengthening treatment of medium and small castings and forgings in casting, construction, chemical industry, motor, machine tool and other industries.
?
The cleaning chamber of hook type shot blasting machine is 2800 mm in length, and its structural features are as follows: the chamber is a phase structure welded by section steel and steel plate, and there are 2-4 shot blasting machines arranged on the side of the chamber body. The layout position of each shot blasting machine is simulated by computer, and the installation angle and position of all the blasting heads are. Each shot blaster is installed with a certain angle with the movement of the workpiece, so as to ensure the cleaning to all sides of the workpiece. In this way, the utilization rate of the projectile is improved to the maximum extent, and the impact on the guard board in the shot blasting cleaning room is effectively avoided. The guard board in the chamber is installed firmly.
?
Medical equipment derusting / medical equipment shot blasting machine / medical bed Shot blasting Rust remover /Qingdao Shandong medical equipment Shot blasting cleaning machine The hook type shot blasting machine has the following advantages:
 Hook type shot blasting machine, price, parameters
Brief introduction of hook shot blasting machine
?
Main products: q376 / Q378 / q3710 / q3720, including single hook and double hook shot blasting machine
?
The machine is suitable for cleaning slender and thin-walled parts that are not suitable for collision. Hook type shot blasting machine is the standard model of shot blasting machine. Its working cylinder diameter is from 900 to 1300 mm, and its height is from 1300 to 2200 mm. The standard model is equipped with 2-7 polishing heads, and the maximum bearing capacity is 10000 kg. The production efficiency of this shot blasting machine is quite high, and the flexibility span is also quite large. It is an ideal cleaning and strengthening equipment, and it is easy to operate. It only needs to load the workpiece to be processed on the machine, press the start button, and after a short time (generally 5-7 minutes), the whole cleaning process is completed It is mainly applicable to surface treatment of various medium and large castings, forgings, weldments and heat-treated parts, including fragile and irregular shaped workpieces.
?
Composition and structure:
?
Hook type shot blasting cleaning machine is hook type cleaning equipment, which is composed of shot blasting cleaning room, hoist, separator, screw conveyor, two shot blasting device assemblies, shot control system, hook traveling track, hook system, rotation device, foundation, dust removal system and electrical control part.

Product features:
?
1. The fourth generation cantilever centrifugal shot blasting machine with large shot blasting quantity and high ejection speed can significantly improve the cleaning efficiency and obtain satisfactory cleaning quality.
?
2. The simulation shot blasting diagram (including the determination of the model, number and space layout of shot blasting machine) and all the drawings of shot blasting machine are completely drawn by computer aided design (CAD), so the selection and layout of shot blasting machine are more reasonable. It improves the utilization rate and labor productivity of the projectile, ensures the cleaning effect, and reduces the wear of the chamber guard board.
?
3. The popular non pit structure is adopted, which not only saves the construction cost and time of the pit foundation, but also solves the problem of shot sand corrosion and caking in the hoist caused by water storage in the pit of Southern users.
?
4. Rolling Mn13 plate is used to protect the hot area in the cleaning room. Compared with the previous rubber plate protection, its service life is greatly improved, and its appearance is beautiful and easy to replace. It is the most popular protection method of cleaning machine room.

Company profile
?
The main products of Qingdao Dingzhu shot blasting machinery Co., Ltd Road blasting machine , crawler shot blasting machine, catenary shot blasting machine, roller table shot blasting machine, hook through type shot blasting machine, shot blasting machine accessories, shot blasting machine maintenance, etc.
?
All products are designed by CAD computer-aided design, which provides the most cost-effective products for casting, metallurgy, automobile, shipbuilding, construction, mining machinery and engineering machinery in China, and can design and manufacture various non-standard special casting machines according to the needs of users, and undertake the turnkey project of design manufacturing debugging training service.

No more
Next: no more