常州附近想过夜电话联系

One stop service provider for production, installation and commissioning of shot blasting machine

Shot blasting machine | shot blasting cleaning machine | through shot blasting machine source strength manufacturers

National Service Hotline

fifteen billion two hundred and sixty-nine million two hundred and four thousand seven hundred and seventy-seven

Q3210 (automatic loading and unloading) crawler shot blasting machine_ Price: 34000 ~ 380000 Yuan

Author: admin Source: This station Time: 18:09, January 12, 2020
Product price:
Price ? 34000.00 ~ 380000.00 yuan
Starting batch ≥1 ? platform
Product specification:
Processing customization yes type Crawler type Object of action Casting and forging
model Q3210 brand Tripod casting roller diameter 1000(mm)
Shot blasting quantity 180kg/min Dust removal air volume 3500m3/h Dust removal efficiency 99.5%
Dimensions 180×165×450(cm) Carrying capacity 600(kg) power 11k(w)
Processing customization yes type Crawler type Object of action steel products Shot blasting cleaning machine
model Q3210 brand Tripod casting roller diameter 1000(mm)
Shot blasting quantity two hundred and twenty Dust removal air volume five thousand and seven hundred Dust removal efficiency ninety-nine
Carrying capacity 600(kg) power 22(w) Can it be customized Customizable
Product picture:
 Q3210 (automatic loading and unloading) crawler shot blasting machine_ Price: 34000 ~ 380000 Yuan
Q3210 (automatic loading and unloading) crawler type Shot blasting machine _ Price: 34000 ~ 380000 Yuan
 Q3210 (automatic loading and unloading) crawler shot blasting machine_ Price: 34000 ~ 380000 Yuan
Q3210 (automatic loading and unloading) Crawler shot blasting machine _ Price: 34000 ~ 380000 Yuan
I. working principle of q3210 crawler shot blasting cleaning machine
?
Automatic feeding Sand cleaning machine The whole working process can be completed automatically from the beginning of loading to the unloading of the cleaned workpiece from the machine. The workpiece to be cleaned is put into the hopper, and the slow down winch will pull the hopper up smoothly. When the hopper reaches the highest point, the hopper will tilt, and the workpiece in the bucket will slide along the bottom of the bucket into the rubber track which is winding. After that, the hopper falls down automatically, and the door of the cleaning chamber descends and closes automatically. The shot blaster starts to shoot the shot at the workpiece to peel off the sticky sand, oxide scale or rust on the surface. At the same time of shot blasting, the crawler of winding motion drives the workpiece to roll continuously, so that each surface of the workpiece is exposed to the high-speed projectile beam and effectively cleaned. The splashed shot passes through the small holes densely distributed on the track, falls into the steel mesh screen at the lower part of the cleaning chamber, reaches the shot hopper, and is horizontally transported to the bottom of the elevator by the screw conveyor, and then is vertically lifted to the shot sand separator at the top. The purified shot flows into the storage bin, and then enters the shot blaster again through the shot supply gate to participate in the circulation. Shot blasting time is controlled by time relay. After shot blasting, the door of cleaning room will open automatically after sand screening, and the crawler will rotate in reverse direction, and the cleaned workpiece will be discharged. A work cycle is completed.
?
II. Main features of q3210 crawler shot blasting cleaning machine
?
1. It can complete automatic loading, automatic opening and closing, automatic circulation, automatic turnover, automatic shot blasting cleaning and automatic unloading.
?
2. The popular non pit form is adopted to save the construction cost of pit foundation.
?
3. The layout of the shot blasting chamber and the shot blaster are determined after the computer three-dimensional dynamic ejection simulation, so that the coverage area of the shot flow accurately covers the surface of the workpiece, and the projectile is thrown to the surface of the workpiece from all directions at the same time.
?
4. The os035 shot blaster produced by advanced technology can significantly improve the cleaning efficiency and obtain satisfactory cleaning effect. All bearings are imported from Germany. The utilization rate of shot is increased by 15%, the wear resistance life is increased by 60%, and the maintenance cost is reduced by 50%.
?
Automatic loading and unloading shot blasting machine
?
Crawler shot blasting machine with automatic loading and unloading
?
III. main structure and features of q3210 crawler shot blasting cleaning machine
?
1. Cleaning room:
?
The blast cleaning room is an integral welded steel plate structure. It is equipped with a shot blasting device at the top, a crawler and its transmission mechanism inside, an end disc on both sides, a feeding sealing door at the front and a screw conveyor at the bottom. The cleaning chamber wall is equipped with wear-resistant protective plates to prevent the projectile from penetrating the chamber wall. Observation windows and access doors are set on both sides of the chamber and the front lower part, so as to observe the internal operation and adjust various components. The middle of the funnel at the lower part of the cleaning chamber is provided with a screen, which is not only convenient for the shot to pass through, but also can effectively prevent the burr and large pieces from entering the bottom screw, thus ensuring the safety of the bottom screw. Wear resistant special iron guard plates are used for the guard plates on both sides of the cleaning room and the end discs.
?
The feeding sealing door is welded by section steel and steel plate to prevent the workpiece from piling up between the door and the crawler. The labyrinth sealing device is set around the door, and the lower part is directly inserted into the lower part of the cleaning room, and a shot returning mechanism is set up, so that the steel shot accumulated in the door gap during the shooting process will return to the lower funnel, and will not fall to the ground, so as to minimize the leakage of the projectile, and prevent the door and seal Blockage between devices due to projectile accumulation. Four rollers are installed on both sides of the door, which run along the rails on both sides respectively, and the opening is stable and reliable without jamming. Two chains with counterweight on the gantry frame are connected to the door, and the reducer (with brake) drives the automatic opening and closing of the door
?
2. Rubber track:
?
It is made of high-quality wear-resistant rubber clip, multi-layer warp and weft reinforcing cloth, which is the bearing body of the workpiece and works by the principle of drum. There are rubber ribs on the crawler to facilitate the better rolling of the workpiece, and many leakage holes are densely distributed to make the shot material circulate. The tension force of the track can be adjusted and the track deviation can be adjusted by the tension shaft.
?
3. Shot blasting machine:
?
The shot blaster assembly is composed of shot blaster, motor and base plate, which is installed on the top of the cleaning chamber. The projectiles are sent to the blade through the directional sleeve window after entering into the guide cylinder. Under the action of high-speed centrifugal force, a fan-shaped projectile beam is formed and shot onto the workpiece to peel off the residual sticky sand, oxide skin and rust on the surface of the workpiece, so as to achieve the purpose of cleaning the workpiece. By adjusting the angle of the orientation sleeve window, the position of the ejection belt can be changed.
?
4. Feeding mechanism:
?
The mechanism is an important part of automatic operation of the whole equipment. The hopper with workpiece is pulled up smoothly by the deceleration winch above. When it reaches the highest point, the hopper inclines and the workpiece is poured into the rubber track in the cleaning chamber. The hopper will return to the starting position automatically.
?
5. Dust removal system:
?
It includes precipitator body, fan, settling box, pipeline, etc. The equipment adopts two-stage dust removal. Firstly, the large particles are settled by the sedimentation box using the inertia principle, and then filtered by the pulse filter cartridge type dust collector. The capture rate of submicron dust can reach more than 99%.
?
IV. q3210 crawler shot blasting cleaning machine automatic loading and unloading, shot blasting cleaning machine quality assurance:
?
1. The design is reasonable and thoughtful, fully considering the various functional requirements of customers.
?
2. Materials required for products: steel plates and profiles are purchased from famous manufacturers.
?
3. All supporting standard parts shall be purchased from famous brand manufacturers as far as possible, such as bearing, motor, reducer, etc.
?
4. In plant load test run of key parts shot blasting machine and dry running test run of all motion mechanisms.
?
5. The design and quality inspection personnel shall set up a special quality supervision group to supervise the implementation of the above steps to ensure the product quality.
?
Note: the above price parameters are only for reference, not for trading price, the specific price is determined according to the equipment configuration, welcome to inquire!