常州附近想过夜电话联系

One stop service provider for production, installation and commissioning of shot blasting machine

Shot blasting machine | shot blasting cleaning machine | through shot blasting machine source strength manufacturers

National Service Hotline

fifteen billion two hundred and sixty-nine million two hundred and four thousand seven hundred and seventy-seven

Multi station of rotary table shot blasting and sand cleaning equipment

Author: admin Source: This station Time: January 12, 2020 18:12

Q35 series turntable Shot blasting cleaning machine It can be divided into single station and multi station: single station refers to the process of strengthening or cleaning the cleaned or strengthened parts directly on the rotating disc. Generally, it refers to the cleaning of medium and large parts; multi station refers to the process in which several (generally 6-10) rotating small turntable stations are installed on the large rotating disc, and multiple parts to be cleaned or strengthened are installed on the rotating small rotary table. With the revolution of the large disc, one side rotates to make the parts receive cleaning or strengthening. Multi station turntable Shot blasting machine It is generally applicable to the cleaning and strengthening of small and medium-sized parts.

It is suitable for cleaning the surface of thin-walled parts such as engine, thin-walled forging machine, forging machine, thin-walled shaft, etc. Shot blasting can not only remove the rust, oxide scale and other dirt on the surface of the workpiece, but also improve the internal stress of the workpiece to achieve the purpose of strengthening.

Multi station shot blasting turntable Sand cleaning machine

Q3510 planetary (parent) rotary table shot blasting machine is suitable for shot blasting and removing oxide skin of various small workpieces after heat treatment, which makes the surface of workpiece reach silver gray, and has the function of removing stress and improving the adhesion of surface coating; it can also use shot blasting technology to increase the surface stress of the above-mentioned workpieces and improve the fatigue strength Shot blasting strengthening Objective. ?
This machine is a continuous rotary table shot blasting machine. It is composed of turntable, shot blasting chamber, shot blasting machine, hoist, separator, shot gate and electric control system. The turntable is rotated by a reducer. There are 24 small turntables on the large turntable, and the workpieces are placed on the small brick platform. With the high speed of the turntable, the projectile is received in the small rotating area of the turntable. The three-dimensional simulation of projection angle ensures no dead angle and uniform cleaning effect. ?
Q3525c rotary table shot blasting machine has the advantages of high efficiency, low power consumption, small land occupation, low installation cost, convenient maintenance, beautiful appearance and safe operation. It is mainly used for cleaning the surface of gear, aluminum alloy, casting and parts that are flat and thin-walled after heat treatment, which are afraid of collision, and remove the sand, oxide scale and attachments on the working surface to obtain a bright surface. ?
Q3516b rotary table shot blasting machine is suitable for surface cleaning of medium and small-sized castings and forgings, flat thin-walled parts that are afraid of collision, and can also be used for surface strengthening treatment of some gears, aluminum alloys and leaf springs. The machine is a pit free foundation, with low installation cost and convenient maintenance. The shot blasting machine is manufactured by foreign advanced technology, with high shooting speed, large shot blasting amount and wear resistance of vulnerable parts Point. ?
? ?

model Q3510
The projectile coverage rate of the cleaned workpiece reaches 200%
Large turntable Diameter (mm) ?1000 Small turntable Diameter (mm) ?150
Time (min) 0.5-5 (adjustable) Speed (R / min) ten
Quantity (piece) twenty-four
Maximum size of workpiece (mm) ?160×200 Load capacity of each station (kg) ≤10
Shot blasting amount (kg / min) 2×80 Productivity (piece / hour) 30-120
Total ventilation volume (m3 / h) six thousand Total power (kw) thirty
Q3525c rotary table shot blasting machine
Diameter of turntable ?2500mm Projectile diameter ?0.5-2mm
Turntable revolution 0.36r/min Hoist capacity 25T/h
Maximum load of turntable 1000kg power 2kw
Clean the outline dimension of workpiece 1000×800×400mm Total ventilation volume 3456m3/h
Total power (excluding dust removal) 25.2kw Maximum shot blasting quantity 380kg / min (2 sets)
Model and power of shot blasting machine Q3023??11kw Total weight of machine 6118kg
Machine dimensions 3200×2850×4502mm
Q3516b rotary table shot blasting machine
Diameter of turntable ?1600mm Projectile diameter ?0.5-2mm
Rotating Speed 0.36r/min Total power 18.9KW
Cleaning time 6-10min Hoist capacity 25T/h
Maximum load capacity of turntable 600kg Hoist speed 1.17 M / S
power 15kw Ventilation rate of cleaning room 1450m3/h
Shot blasting quantity 230kg/min×1 Ventilation rate of separator 1050m3/h
Maximum size of cleaning workpiece 700×250×250mm Total weight of machine 3910kg
Dimensions 2500×2400×4000mm

Next: no more